Senior Lecturer

Automotive and Motorsport Engineering - UH-000024

Requirements apply to students taking an IMechE accredited course. Please refer to the Programme Specification Document under Section 18 'Regulation of Assessment' for details.

The University of Huddersfield seeks and encourages applicants in order to widen participation, improve access and apply the principles of equal opportunities.  We provide support for applicants who require additional assistance in order to select the right course of study and make a successful transition to studying at University.  We encourage local, national and international applications.  Further information for International Students can be found on their website.<a href="http://www.hud.ac.uk/international">http://www.hud.ac.uk/international</a>
If you were educated outside the UK, you are required to have International English Language Testing System (IELTS) at a score of 6.0 with a minimum score of 6.0 in writing and a minimum of 5.5 in any single component.  If you have alternative qualifications or do not meet the IELTS requirement we also offer a range of <a href="http://www.hud.ac.uk/international/pre-sessionalenglishprogramme/">Pre-Sessional English Programmes.</a>
The University provides opportunities for the accreditation of prior learning (APL) as stated in section 3 of the <a href="https://www.hud.ac.uk/policies/registry/awards-taught/section-3/">Regulations for Awards.</a>
 The University’s general minimum entry requirements are specified in Section 1 of the <a href="https://www.hud.ac.uk/policies/registry/awards-taught/section-1/">Regulations for Awards.</a>
Every person who applies for this course and meets the minimum entry requirement – regardless of any disability – will be given the same opportunity in the selection process.  General advice and information regarding disability and the support the University can give can be found by contacting student services as follows:
Telephone: 01484 472675
Email: disability@hud.ac.uk
Further information is available on the <a href="https://students.hud.ac.uk/help/disability/">disability services website.</a>    
Further advice on the specific skills and abilities needed to successfully undertake this course can be found by contacting the admissions tutor and by visiting our <a href="https://courses.hud.ac.uk/">course finder website page</a>.
Course entry requirements are as given on the University web site (<a href="https://courses.hud.ac.uk/">https://courses.hud.ac.uk/</a>).

UH-000024 - Automotive and Motorsport Engineering

Intermediate Compulsory

Intermediate Optional

Intermediate Core

Intermediate Level

Sandwich Year Out Optional

Sandwich Year Out

Honours Core

Honours Optional

Honours Compulsory

Honours Level

Foundation Optional

Foundation Core

Foundation Compulsory

Foundation Level

Structure

<div>The following course regulation, which is a requirement of Professional body accreditation, will be applicable for student entry from academic year 2022-2023. </div>
<div>
<ul>
<li>A maximum of 30 credits in a Bachelor’s or Integrated Master’s degree can be condoned (termed Compensation by the Engineering Council). If a module is available for Condonement, an opportunity will be given to undertake the appropriate referral assessment/s – if however the respective module is not subsequently assessed as an overall pass, then the condoned pass credits will be awarded, with no further module condonement available in subsequent levels of the course.</li>
</ul>
</div>

Bachelor of Engineering

Certificate of Higher Education

Diploma of Higher Education

Identify and outline the commercial and economic context of engineering processes and the management techniques which may be used to achieve engineering objectives within that context. 

Manage their own time and resources and have both the desire and skills necessary for lifelong learning. 

Identify and manage cost drivers for engineering activities whilst ensuring fitness for purpose for the entire product or process life cycle. 

Describe and illustrate the principles and techniques of Automotive and Motorsport Engineering design with knowledge of engineering materials and components including recent developments in the fields.

Recall and state the framework of relevant legal requirements governing engineering activities in general and specifically in Automotive and Motorsport Engineering, including personnel, health, safety, and risk issues and the need for engineering activities to promote sustainable development. 

Systematically state and explain the mathematical, scientific and engineering principles that underpin Automotive and Motorsport Engineering analysis.

Be creative and innovative within a structured framework in problem solving with the ability to work with limited or contradictory information.

Apply and manage a systematic and evaluative approach to the creation of innovative solutions that recognize customer requirements and technical uncertainty and the constraints due to environmental, health and safety and risk assessment factors. 

 Apply engineering principles to enable engineering systems and their performance to be classified and described using analytical methods and modelling techniques.

Use appropriate mathematical analysis, simulation techniques and IT tools to obtain solutions to models of mechanical systems and processes.

Apply a range of workshop and laboratory practical skills to aid the research and development of engineering products and processes. 

Recount the variety of contexts in which engineering knowledge can be applied. 

Name and outline the codes of practice used in industry and review the need for a high level of professional and ethical conduct in engineering.

Manipulate, sort and evaluate data using scientific methods and present it in a range of formats using IT tools where appropriate.

Be able to work effectively within a team environment, communicating in both written and oral form. 

Integrate and apply wider learning from other engineering disciplines to support the study of Automotive and Motorsport Engineering.

<ul>
<li>The School Teaching and Learning Committee, a sub-committee of the University Teaching and Learning Committee, is tasked with implementing the University’s teaching and learning strategy and with fostering innovation in teaching and learning and the dissemination of good practice</li>
<li>The School Board, via the School Teaching and Learning Committee has responsibility for implementing University policy through school-defined procedures.</li>
<li>Periodic school and subject reviews take place on a rolling quinquennial programme and focus inter alia on the arrangements for quality management and enhancement, teaching, learning and assessment, C&amp;IT strategies, the articulation and assurances of standards, external examiner reports and evaluation and links with professional bodies, employers and other external organisations.</li>
<li>The Course Committee is responsible for the monitoring and development of the course or programme, taking account of feedback from staff, students and external examiners. Feedback is sought as follows:
<ul>
<li>From students through annual course and module evaluation questionnaires.</li>
<li>From external examiners through annual reports, course assessment board minutes, assessment moderation reports and informal verbal communication during the year.</li>
<li>The annual evaluation of the course/programme is the responsibility of the School Board. The Course Committee prepares an annual evaluation report comprising reporting and evaluation, informed by feedback from staff, students and external examiners and by statistical data.</li>
</ul>
</li>
<li>Amendments to course/programme and module documents are validated by the School Accreditation and Validation Panel.</li>
<li>A process for peer observation of teaching is in place with the object of enhancing teaching practice and sharing ideas between staff.</li>
</ul>

UH-000024

The latest subject review for the subject area that includes these courses took place in November 2020. The panel commended the subject area for its assessment strategy, strong research portfolio, industrial liaison panel and the strength of its placement system. The named courses in the area were last accredited by the IMechE in January 2020. The panel commended the area for amongst other things, the Staffs’ enthusiasm toward the students, the enthusiasm and involvement of the Industrial Advisory Panel, the work of the Placement unit, plans for laboratories, innovative approaches to learning methods and the range of projects satisfying the learning outcomes.

At course level support is provided by:
<ul>
<li>Supporting documentation is provided, online, in the form of Student Handbooks, Module Handbooks, Programme Specification Documents (PSD) and Module Specification Documents (MSD)</li>
<li>The Course Leader is available to provide guidance on academic progress.</li>
<li>Module tutors are available to help with academic problems during term time, either on campus or through electronic means such as Microsoft Teams, to facilitate support for distance learning students.</li>
<li>All modules and year groups are supported on the Virtual Learning Environment</li>
</ul>

Automotive and Motorsport Engineering

Term 1

Term 2

Year 2

Year 3

Year 1

Copied from 2023.01 - BEngHons Automotive and Motorsport Engineering FT Sept

Year 4

Copied from 2023.01 - BEngHons Automotive and Motorsport Engineering SW Sept

The School of Computing and Engineering provides additional student support using a variety of approaches:
<ul>
<li>All students undertake an induction programme at the start of their studies.</li>
<li>All students have a Personal Academic Tutor (PAT), with whom they should discuss academic difficulties. The PAT will refer tutees to central help facilities as appropriate.</li>
<li>A Guidance Team supports students with a wide range of Learning and Academic skills development (<a href="https://students.hud.ac.uk/unilife/sce/studentsupport/">Student Support - University of Huddersfield</a>), through seminars, workshops and 1-1 appointments.</li>
<li>A central computer-based attendance-monitoring scheme is operated and students with poor attendance are contacted and advised.</li>
</ul>
The School has a specialised placement unit offering extensive support to students undertaking placements within their course. This includes CV reviews, interview practice, placement searching and guidance on all aspects of the application process.