Senior Lecturer

Automotive and Motorsport Engineering - UH-000064

Requirements apply to students taking an IMechE accredited course. Please refer to the Programme Specification Document under Section 18 'Regulation of Assessment' for details.

The University of Huddersfield seeks and encourages applicants in order to widen participation, improve access and apply the principles of equal opportunities.  We provide support for applicants who require additional assistance in order to select the right course of study and make a successful transition to studying at University.  We encourage local, national and international applications.  Further information for International Students can be found on their website.<a href="http://www.hud.ac.uk/international">http://www.hud.ac.uk/international</a>
If you were educated outside the UK, you are required to have International English Language Testing System (IELTS) at a score of 6.0 with a minimum score of 6.0 in writing and a minimum of 5.5 in any single component.  If you have alternative qualifications or do not meet the IELTS requirement we also offer a range of <a href="http://www.hud.ac.uk/international/pre-sessionalenglishprogramme/">Pre-Sessional English Programmes.</a>
The University provides opportunities for the accreditation of prior learning (APL) as stated in section 3 of the <a href="https://www.hud.ac.uk/policies/registry/awards-taught/section-3/">Regulations for Awards.</a>
The University’s general minimum entry requirements are specified in Section 1 of the <a href="https://www.hud.ac.uk/policies/registry/awards-taught/section-1/">Regulations for Awards.</a>
Every person who applies for this course and meets the minimum entry requirement – regardless of any disability – will be given the same opportunity in the selection process.  General advice and information regarding disability and the support the University can give can be found by contacting student services as follows:
Telephone: 01484 472675
Email: disability@hud.ac.uk
Further information is available on the <a href="https://students.hud.ac.uk/help/disability/">disability services website.</a>    
Further advice on the specific skills and abilities needed to successfully undertake this course can be found by contacting the admissions tutor and by visiting our <a href="https://courses.hud.ac.uk/">course finder website page</a>.
Course entry requirements are as given on the University web site (<a href="https://courses.hud.ac.uk/">https://courses.hud.ac.uk/</a>).

Course Specific Progression Requirements  
Year 2 to Year 3/4  
<ul>
<li>normally, a minimum average mark for the year of 60% or above. </li>
</ul>
Year 4 to Year 5 
<ul>
<li>normally, a minimum average mark for the year of 60% or above, </li>
<li>the Individual Project module to be passed at the first attempt. </li>
<li>Year 4 students who are unable to progress to Year 5 or elect not to continue will be eligible for a Bachelor’s degree with honours award, as detailed in the University of Huddersfield Regulations for Awards. </li>
</ul>
Applicable for student entry from academic year 2020-2021
<ul>
<li>The Integrated Master’s Degrees (second cycle award) receive classification awards, using the same system for the Bachelor’s degree (first cycle), namely First Class, Upper Second Class, Lower Second Class, or Third Class. </li>
</ul>
Master’s Award Classification Calculation
On completion of a Master’s course the classification will be determined by the weighted numerical year credit average, as follows:
<ul>
<li>M-level: weighting of 3 - 120 credit average</li>
<li>H-Level: weighting of 2 - ‘best’ 100 credit average</li>
<li>I-Level: weighting of 1 - ‘best’ 100 credit average</li>
</ul>

UH-000064 - Automotive and Motorsport Engineering

Masters Compulsory

Masters Core

Masters Optional

Masters Level

Foundation Compulsory

Foundation Core

Foundation Optional

Foundation Level

Sandwich Year Out Optional

Sandwich Year Out

Intermediate Core

Intermediate Optional

Intermediate Compulsory

Intermediate Level

Honours Core

Honours Optional

Honours Compulsory

Honours Level

Structure

<div>The following course regulation, which is a requirement of Professional body accreditation, will be applicable for student entry from academic year 2022-2023. </div>
<div>
<ul>
<li>A maximum of 30 credits in a Bachelor’s or Integrated Master’s degree can be condoned (termed Compensation by the Engineering Council). If a module is available for Condonement, an opportunity will be given to undertake the appropriate referral assessment/s – if however the respective module is not subsequently assessed as an overall pass, then the condoned pass credits will be awarded, with no further module condonement available in subsequent levels of the course.</li>
</ul>
</div>

Bachelor of Engineering

Diploma of Higher Education

Certificate of Higher Education

Bachelor of Engineering with Honours

Place engineering projects in a wider business context and to be able to assess the technical, commercial and political risk of projects with respect to this setting.

Apply engineering principles to enable engineering systems and their performance to be classified and described using analytical methods and modelling techniques.

Describe and illustrate the principles and techniques of Automotive and Motorsport Engineering design with knowledge of engineering materials and components including recent developments in the fields.


Apply basic scientific principles in previously unfamiliar fields and adapt quickly to developments in IT pertinent to engineering.

Systematically state and explain the mathematical, scientific and engineering principles that underpin Automotive and Motorsport Engineering analysis.

Manipulate, sort and evaluate data using scientific methods and present it in a range of formats using IT tools where appropriate.

Use appropriate mathematical analysis, simulation techniques and IT tools to obtain solutions to models of mechanical systems and processes.

Be able to work effectively within a team environment, communicating in both written and oral form.

Apply and manage a systematic and evaluative approach to the creation of innovative solutions that recognize customer requirements and technical uncertainty and the constraints due to environmental, health and safety and risk assessment factors.

Recount the variety of contexts in which engineering knowledge can be applied.

Have a greater depth and breadth of knowledge and an improved understanding of the limitations of this knowledge.

Integrate and apply wider learning from other engineering disciplines to support the study of Automotive and Motorsport Engineering.

Be creative and innovative within a structured framework in problem solving with the ability to work with limited or contradictory information.

MEng students will be equipped with the skills required to act as team leaders. They will be able to guide the creativity and learning of others and take a proactive approach towards their own lifelong learning.

Apply a range of workshop and laboratory practical skills to aid the research and development of engineering products and processes.

Name and outline the codes of practice used in industry and review the need for a high level of professional and ethical conduct in engineering.

Identify and outline the commercial and economic context of engineering processes and the management techniques which may be used to achieve engineering objectives within that context.

Identify and manage cost drivers for engineering activities whilst ensuring fitness for purpose for the entire product or process life cycle.

Recall and state the framework of relevant legal requirements governing engineering activities in general and specifically in Automotive and Motorsport Engineering, including personnel, health, safety, and risk issues and the need for engineering activities to promote sustainable development.

Manage their own time and resources and have both the desire and skills necessary for lifelong learning.

<ul>
<li>The School Teaching and Learning Committee, a sub-committee of the University Teaching and Learning Committee, is tasked with implementing the University’s teaching and learning strategy and with fostering innovation in teaching and learning and the dissemination of good practice</li>
<li>The School Board, via the School Teaching and Learning Committee has responsibility for implementing University policy through school-defined procedures.</li>
<li>Periodic school and subject reviews take place on a rolling quinquennial programme and focus inter alia on the arrangements for quality management and enhancement, teaching, learning and assessment, C&amp;IT strategies, the articulation and assurances of standards, external examiner reports and evaluation and links with professional bodies, employers and other external organisations.</li>
<li>The Course Committee is responsible for the monitoring and development of the course or programme, taking account of feedback from staff, students and external examiners. Feedback is sought as follows:
<ul>
<li>From students through annual course and module evaluation questionnaires.</li>
<li>From external examiners through annual reports, course assessment board minutes, assessment moderation reports and informal verbal communication during the year.</li>
<li>The annual evaluation of the course/programme is the responsibility of the School Board. The Course Committee prepares an annual evaluation report comprising reporting and evaluation, informed by feedback from staff, students and external examiners and by statistical data.</li>
</ul>
</li>
<li>Amendments to course/programme and module documents are validated by the School Accreditation and Validation Panel.</li>
<li>A process for peer observation of teaching is in place with the object of enhancing teaching practice and sharing ideas between staff.</li>
</ul>

UH-000064

The latest subject review for the subject area that includes these courses took place in November 2020. The panel commended the subject area for its assessment strategy, strong research portfolio, industrial liaison panel and the strength of its placement system. The named courses in the area were last accredited by the IMechE in January 2020. The panel commended the area for amongst other things, the Staffs’ enthusiasm toward the students, the enthusiasm and involvement of the Industrial Advisory Panel, the work of the Placement unit, plans for laboratories, innovative approaches to learning methods and the range of projects satisfying the learning outcomes.

At course level support is provided by:
<ul>
<li>Supporting documentation is provided, online, in the form of Student Handbooks, Module Handbooks, Programme Specification Documents (PSD) and Module Specification Documents (MSD)</li>
<li>The Course Leader is available to provide guidance on academic progress.</li>
<li>Module tutors are available to help with academic problems during term time, either on campus or through electronic means such as Microsoft Teams, to facilitate support for distance learning students.</li>
<li>All modules and year groups are supported on the Virtual Learning Environment.</li>
</ul>